Opis
Plug In & Play Dante Stagebox SolutionThe Tio1608-D is a Dante-equipped I/O rack with 16 microphone/ line inputs and 8 line outputs.The Tio1608-D is a Dante-equipped I/O rack with 16 microphone/ line inputs and 8 line outputs. Tio racks feature the same recallable D-PRE™ microphone preamplifiers as the TF series delivering extraordinarily natural and musical sound. In combination with TF series consoles, Tio racks can be connected using up to three units with a fast and easy setup.* Optional NY64-D Card is required. The Tio1608-D is a Dante-equipped I/O rack with 16 microphone/ line inputs and 8 line outputs. Tio racks feature the same recallable D-PRE™ microphone preamplifiers as the TF series delivering extraordinarily natural and musical sound. In combination with TF series consoles, Tio racks can be connected using up to three units with a fast and easy setup. * Optional NY64-D Card is required. OpisDigital Stagebox System with a Maximum of 3 units Users wishing to expand on the TFs already extensive input/output capability can easily add up to 3 units with the optional NY64-D expansion card and Tio1608-D I/O racks. Daisy-chaining the main console offstage and Tio1608-D I/O racks on stage using li…Więcej funkcji Powiązane produktyTF5 [TF Series]Bardzo duża ilość wejść i tłumików gwarantuje doskonałe warunki pracy w dużych instalacjach.TF3 [TF Series]Duża ilość wejść i tłumików oraz praktyczne sterowanie w kompaktowej obudowie – idealny mikser do szerokiego zakresu zastosowań.TF1 [TF Series]TF1 to kompaktowa, przenośna konsola mikserska z możliwością montażu w rack`u – idealne rozwiązanie do mniejszych instalacji.NY64-DThe NY64-D is a Dante expansion card for TF series consolesNowości i wydarzenia5/4/2016 [Pro Audio]Yamaha podczas ProLight+Sound 2016Podczas ProLight+ Sound 2016 firma Yamaha będzie promować szeroką gamę nowych oraz niedawno wprowadzonych na rynek produktów, które spełniają dzisiejsze wymagania profesjonalnej branży audio.10/8/2015 [Pro Audio]Yamaha prezentuje nowy aktywny subwoofer DXS18Nowy model opiera się na design`ie swoich poprzedników – DXS12 oraz DXS15. DXS18 posiada wzmocnioną konstrukcję obudowy, ulepszony procesor DSP, funkcje zabezpieczające oraz kontrolę zwrotnicy głośnika. Nowy, jeszcze bardziej wszechstronny subwoofer oraz jego duża moc to gwarancja niezawodności, nawet w dużych i bardziej profesjonalnych systemach nagłośnieniowych.OpisDigital Stagebox System with a Maximum of 3 units Users wishing to expand on the TFs already extensive input/output capability can easily add up to 3 units with the optional NY64-D expansion card and Tio1608-D I/O racks. Daisy-chaining the main console offstage and Tio1608-D I/O racks on stage using lightweight CAT5e Ethernet cables allows low-latency, high-quality sound transmission without the time-consuming transport and setup of bulky analog snakes.// Dante High Reliability Network Audio Protocol Dante has been adopted by the leading manufacturers and professionals in the sound reinforcement industry for its low jitter, low latency, and high sampling accuracy. Using the Tio1608-D you can easily configure a high-performance Dante stagebox system with little or no IT networking knowledge. Thanks to the flexibility of the Dante network protocol, TF Series consoles can be connected to an extensive range of Dante-enabled equipment such as R Series I/O racks.// Fast and Easy QUICK CONFIG Mode By enabling the QUICK CONFIG mode on the Tio1608-D, all the connection settings such as network settings and audio patching are set automatically making system configuration easy. After confirming QUICK CONFIG mode is activated on the TF console and Tio racks, simply set a UNIT ID for each Tio1608-D, then daisy chain the TF console and the Tio racks. Turn on the power and youre ready to go!// Simple and Flexible Input Selection Once the basic configuration is completed you can easily assign inputs to best suit your system setup. By using the ALL INPUT function, users can assign all inputs to the Tio racks, the TF console or a PC/Mac device instantly. Users can also change each input to receive signal from multiple locations so that users can effectively use all inputs.// Recallable D-PRE preamplifiers The Tio1608-D inherits the natural, musical sensibility that we pursued in the development of the TF Series. Mechanical construction, circuit board layout, power supply, grounding, and parts selection have all been executed with meticulous attention to detail and quality, combined with exhaustive performance and listening tests at each stage of development. The Tio1608-D features the same recallable D-PRE microphone preamplifiers as the TF Series to provide a consistent, natural, musical sound throughout the entire system.// Flexible system expansion via DanteDante Network Audio Protocol has been adopted, not only in TF, but also in other Yamaha digital mixing consoles such as CL/QL. Combining these I/O racks and the various consoles can significantly increase the flexibility of system designs. Patching can be enabled via “Dante Controller” while Remote HA can be controlled by “R Remote” software. In the future, audio patching and Remote HA will be controlled not only from TF but also from CL/QL thanks to scheduled firmware updates. Please note that Remote HA of the Tio1608-D can be implemented only via the Primary port. (It is not possible via Secondary port).System expansion with Tio1608-D Tio1608-D allows you to easily expand a TF digital mixer system up to 40ch inputs/24ch outputs. System setup uses a Plug In & Play method. Simply connect Cat5e cable, select the device IDs and the system is ready. Remote HA control is available via Cat5e. StageMix App allows wireless remote control of the console from the arena, the stage or the audience etc. General specificationsSampling frequency rateExternal44.1kHz or 48kHzSignal delayLess than 3ms INPUT to OUTPUT, connect with TF5 and NY64-D using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHzTotal harmonic distortionLess than 0.1% +4dBu@20Hz-20kHz into 600Ω, Gain=+66dB / Less than 0.05% +4dBU@20Hz-20kHz into 600Ω, Gain=-6dB, INPUT to OUTPUT, Fs=44.1kHz, 48kHz *Measured with a -18dB/octave filter @80kHzFrequency response+0.5, -1.5dB 20Hz-20kHz, refer to the nominal output level @1kHz, INPUT to OUTPUT, Fs=44.1kHz or 48kHzDynamic range108 dB, INPUT to OUTPUT, Gain=-6dB / 112 dB, DA ConverterHum & noise levelEquivalent input noise-128dBu, Gain=+66dB *Measured with A-weighting filterResidual output noise-88dBu, ST master off *Measured with A-weighting filterCrosstalk-100dB, adjacent INPUT/OUTPUT channels, Input Gain = -6dB *Measured with a -30dB/octave filter @22kHzHeat dissipation100-240V, 50/60Hz, 43.5kcal/hPower requirements100-240V, 50/60HzPower consumption50WDimensionsW480mm (18-7/8″)H88mm (3-4/8″)D364mm (14-3/8″)Net weight5.7kg (12.6lbs)AccessoriesOwner’s Manual, Power Cord(2.5m), Rubber stoppers(4)OthersTemperature Range: Operating temperature range: 0 – 40℃, Storage temperature range: -20 – 60℃Analog input characteristicsInput TerminalsGAINActual LoadImpedanceFor Use WithNominalInput LevelConnectorBalanced /UnbalancedSensitivity*1NominalMax. before clipINPUT1-16+66dB7.5kΩ50-600Ω Mics &600Ω Lines-82dBu (61.6μV)-62dBu (0.616mV)-42dBu (6.16mV)Combo Jack (XLR-3-31 type *2or TRS phone *3)Balanced-6dB-10dBu (245mV)+10dBu (2.45V)+30dBu (24.5V)In these specifications, 0dBu = 0.775Vrms.+48V DC (phantom power) can be supplied to INPUT XLR type connectors via each individual software controlled switch. *1. Sensitivity is the lowest level that will produce an output of +4dBu (1.23V) or the nominal output level when the unit is set to maximum gain.*2. 1: GND, 2: HOT, 3: COLD*3. Tip: HOT, Ring: COLD, Sleeve: GNDAnalog output characteristicsOutput TerminalsActual SourceImpedanceFor Use WithNominalOutput LevelConnectorBalanced /UnbalancedNominalMax. before clipOUTPUT 1-875Ω600Ω Lines+4dBu (1.23 V)+24dBu (12.3V)XLR-3-32 type*1BalancedIn these specifications, 0dBu = 0.775Vrms.*1.1: GND,2: HOT, 3: COLDDigital Input & Output CharacteristicsTerminalFormatData lengthLevelAudioConnectorPrimary/SecondaryDante24bit or 32bit1000Base-T16ch ( Tio1608-D to other devises)8ch (Other devises to Tio1608-D)etherCON Cat5e// TecnologiaAudio – Video// SpecyfikacjeGeneral specifications Sampling frequency rateExternal44.1kHz or 48kHzSignal delayLess than 3ms INPUT to OUTPUT, connect with TF5 and NY64-D using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHzTotal harmonic distortionLess than 0.1% +4dBu@20Hz-20kHz into 600Ω, Gain=+66dB / Less than 0.05% +4dBU@20Hz-20kHz into 600Ω, Gain=-6dB, INPUT to OUTPUT, Fs=44.1kHz, 48kHz *Measured with a -18dB/octave filter @80kHzFrequency response+0.5, -1.5dB 20Hz-20kHz, refer to the nominal output level @1kHz, INPUT to OUTPUT, Fs=44.1kHz or 48kHzDynamic range108 dB, INPUT to OUTPUT, Gain=-6dB / 112 dB, DA ConverterHum & noise levelEquivalent input noise-128dBu, Gain=+66dB *Measured with A-weighting filterResidual output noise-88dBu, ST master off *Measured with A-weighting filterCrosstalk-100dB, adjacent INPUT/OUTPUT channels, Input Gain = -6dB *Measured with a -30dB/octave filter @22kHzHeat dissipation100-240V, 50/60Hz, 43.5kcal/hPower requirements100-240V, 50/60HzPower consumption50WDimensionsW480mm (18-7/8″)H88mm (3-4/8″)D364mm (14-3/8″)Net weight5.7kg (12.6lbs)AccessoriesOwner’s Manual, Power Cord(2.5m), Rubber stoppers(4)OthersTemperature Range: Operating temperature range: 0 – 40℃, Storage temperature range: -20 – 60℃Analog input characteristicsInput TerminalsGAINActual Load ImpedanceFor Use With NominalInput LevelConnectorBalanced / UnbalancedSensitivity*1NominalMax. before clipINPUT1-16+66dB7.5kΩ50-600Ω Mics & 600Ω Lines-82dBu (61.6μV)-62dBu (0.616mV)-42dBu (6.16mV)Combo Jack (XLR-3-31 type *2 or TRS phone *3)Balanced-6dB-10dBu (245mV)+10dBu (2.45V)+30dBu (24.5V)In these specifications, 0dBu = 0.775Vrms. +48V DC (phantom power) can be supplied to INPUT XLR type connectors via each individual software controlled switch. *1. Sensitivity is the lowest level that will produce an output of +4dBu (1.23V) or the nominal output level when the unit is set to maximum gain. *2. 1: GND, 2: HOT, 3: COLD *3. Tip: HOT, Ring: COLD, Sleeve: GND Analog output characteristicsOutput TerminalsActual Source ImpedanceFor Use With NominalOutput LevelConnectorBalanced / UnbalancedNominalMax. before clipOUTPUT 1-875Ω600Ω Lines+4dBu (1.23 V)+24dBu (12.3V)XLR-3-32 type*1BalancedIn these specifications, 0dBu = 0.775Vrms. *1.1: GND,2: HOT, 3: COLD Digital Input & Output CharacteristicsTerminalFormatData lengthLevelAudioConnectorPrimary/SecondaryDante24bit or 32bit1000Base-T16ch ( Tio1608-D to other devises) 8ch (Other devises to Tio1608-D)etherCON Cat5eAkcesoria opcjonalneWsparcieMateriały do pobraniaAby zapisać plik PDF, kliknij go, a następnie użyj funkcji zapisywania plików przeglądarki internetowej lub programu Adobe Reader.NY64-D Owners Manual [English / 3.1MB]Tio1608-D Owners Manual [English / 6.5MB]Więcej do pobrania// Sampling frequency rateExternal44.1kHz or 48kHzSignal delayLess than 3ms INPUT to OUTPUT, connect with TF5 and NY64-D using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHzTotal harmonic distortionLess than 0.1% +4dBu@20Hz-20kHz into 600Ω, Gain=+66dB / Less than 0.05% +4dBU@20Hz-20kHz into 600Ω, Gain=-6dB, INPUT to OUTPUT, Fs=44.1kHz, 48kHz *Measured with a -18dB/octave filter @80kHzFrequency response+0.5, -1.5dB 20Hz-20kHz, refer to the nominal output level @1kHz, INPUT to OUTPUT, Fs=44.1kHz or 48kHzDynamic range108 dB, INPUT to OUTPUT, Gain=-6dB / 112 dB, DA ConverterHum & noise levelEquivalent input noise-128dBu, Gain=+66dB *Measured with A-weighting filterResidual output noise-88dBu, ST master off *Measured with A-weighting filterCrosstalk-100dB, adjacent INPUT/OUTPUT channels, Input Gain = -6dB *Measured with a -30dB/octave filter @22kHzHeat dissipation100-240V, 50/60Hz, 43.5kcal/hPower requirements100-240V, 50/60HzPower consumption50WDimensionsW480mm (18-7/8″)H88mm (3-4/8″)D364mm (14-3/8″)Net weight5.7kg (12.6lbs)AccessoriesOwner’s Manual, Power Cord(2.5m), Rubber stoppers(4)OthersTemperature Range: Operating temperature range: 0 – 40℃, Storage temperature range: -20 – 60℃// FAQFAQ
Producent: Yamaha Music
buty bhp męskie, bluza meska robocza, skierowanie na badanie lekarskie od pracodawcy, czynnik szkodliwy definicja, buty robocze męskie z metalowym noskiem
yyyyy
